Wolf DF48450DG/S/P Guide D'utilisation Et D'entretien page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Oven Operation
Oven Operation
CLOCK
The clock is visible on the control panel during all cook-
ing modes. However, the unit is shipped with the standby
power feature enabled, which causes the screen to go
blank after five minutes of inactivity. To disable standby
power, refer to extended options. It is very important the
clock be set to the correct time if a timed cook feature is
used. The clock must be reset after a power outage.
The clock sets automatically if the unit is connected to
Wi-Fi. Refer to Connect This Appliance on page 11.
Setting clock:
1
Touch Settings, then select Time.
Touch 12 Hour or 24 Hour mode.
2
3
Use the slide bar to set the time of day, select AM or
PM, then touch Set. A chime indicates the clock is set.
Time can also be adjusted by touching the time display on
the home screen.
10 | Wolf Customer Care 800.222.7820
TIMER
Each timer can be set for a maximum of 11 hours and 59
minutes. Once a time is set, the countdown is illuminated
on the control panel display. The timer is independent
from the oven. Setting the timer does not affect cook time
or stop time.
Setting timer:
Touch Timer 1 or Timer 2.
1
2
Use the slide bar to set the duration, then touch Set.
A chime indicates the timer is set.
3
To cancel or edit, touch the countdown time on the
display.
The timer chimes with one minute remaining. The timer
4
chimes and flashes when complete.
Touch the flashing time to clear.
5

Publicité

Table des Matières
loading

Table des Matières