Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
night dim mode
In night dim mode, the light intensity of the lights and the display is reduced and the volume of alert
sounds is decreased.
1
Press the night dim button to activate the night dim mode. The night dim mode symbol
appears on the display (Fig. 8).
2
To switch back to normal operating mode, press the night dim button again.
Baby unit battery low alert
1
When the baby unit runs on battery power and its batteries are low, the parent unit beeps
and the text 'Baby unit Change batteries' appears on the display.
2
When you do not replace the batteries in time, the link with the baby unit will be lost.
Battery status indications
The battery charge status is indicated on the display by the battery status indicator and by text
messages.
Battery low
When the rechargeable batteries are low, 'BATTERY LOW' appears on the display, the status
indicator is empty and flashes, and the parent unit beeps.The remaining operating time is at least
30 minutes.
Battery empty
1
If the rechargeable batteries are almost empty, the battery status light flashes red
quickly (Fig. 9).
2
If you do not connect the parent unit to the mains, it switches off.
Menu of the parent unit
navigating the menu
Note: Some menu functions only work when the baby unit and the parent unit are linked.
1
Press the MENU button to open the menu and to make the first menu option
appear (Fig. 10).
2
Use the + button to go to the next option or the - button to go to the previous option.
The arrow on the display indicates in which direction you can navigate (Fig. 11).
3
Press the OK button to confirm your selection (Fig. 12).
Note: Press the MENU button if you want to leave the menu without making any changes. If there is no
input in the menu for more than 20 seconds, the menu closes automatically.
Sensitivity
This option in the parent unit menu allows you to set the microphone sensitivity of the baby unit.
The microphone sensitivity determines what noise level the baby unit picks up, e.g. you will want to
hear when your baby cries, but you may be less interested in its babbling.
1
Select 'Sensitivity' in the menu with the + and - buttons and press OK to confirm.
2
Use the + and - buttons to increase or decrease the microphone sensitivity. The number of
filled segments shows the sensitivity level selected. Press OK to confirm the setting.
EngliSh
9
Publicité
Table des Matières
