GoodHome Duala Manuel D'utilisation page 12

. .
. .
Use
. .
. .
. .
.
Locking the buttons
• Press and hold for more than 3 seconds on the
indicates that it is locked.
The button is never locked.
Mode selection
• Press the button to display Πod, then the OK-boost button, then press + or - to select one of the
following modes :
Con (Comfort)
Pro (Programme)
EcP (Programme Ecopilote) Simplified weekly programming (refer to the Weekly programming
FilP
FrF (Frost protection)
Eco (Economy)
• Press the button to cancel the setting, or the OK-boost button to validate the mode: the mode and
temperature are displayed alternately every 3 seconds.
Setting the Comfort mode temperature
The Comfort and ECO setpoint temperatures are set separately.
The Comfort mode temperature range is between 13.5°C and 30°C and can be adjusted in increments of
0.5°C. If limited, reduce the ECO temperature, as the Comfort temperature is always higher than the ECO
temperature.
• When Comfort mode (Con) is in operation, press the + or - button to increase or reduce the setpoint
temperature ; the temperature flashes.
• Press the button to cancel the setting, or the OK-boost button to validate the Comfort temperature
selected.
Constant temperature that can be set between 13.5°C and 30°C.
Weekly programming (refer to the Weekly programming section).
section).
unused
Temperature at 7.5°C, not adjustable.
Constant temperature that can be set between 13°C and 29.5°C.
button to lock or unlock the buttons. The
12
icon