Reading The Display - boso medilife PC2 Mode D'emploi

Reading the display

As soon as the unit registers the first beats, the
symbol blinks in time with the pulse rhythm
and the falling pressure in the cuff is displayed
After the measurement, the built-in solenoid
valve opens automatically to rapidly release
the remaining pressure in the cuff.
The measurement readings are shown in the
display:
systole
mmHg
diastole
mmHg
Pulse/min
The unit switches off automatically after
approximately one minute and changes to the
time display mode. To repeat a measurement,
press the START button again.
Aborting a measurement
A measurement can be aborted at any time by
pressing the START button. The cuff is then
automatically deflated. In case of error, you
can always remove the unit at any time by sim-
ply opening the cuff.
29