Philips HQ7830/16 Mode D'emploi page 9

C
Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
Remove the hairs with the brush supplied.
Put the retaining plate back onto the shaving
unit.
Cause 3: shaving heads are damaged or worn.
B
Remove the retaining frame.
Remove the old shaving heads from the
shaving unit and replace them with new ones
Damaged or worn shaving heads (cutters and
guards) must only be replaced with the original
Philishave HQ6 Quadra shaving heads.
Put the retaining plate back onto the shaving
unit.
2 The shaver does not work when the
ON/OFF button is pressed
Cause: the batteries are empty.
B
Recharge the batteries.
3 Shaving unit has come off shaver
ENGLISH
11