Philips HQ7830/16 Mode D'emploi page 3

Charging
Recharge, store and use the appliance at a
temperature between 5cC and 35cC.
The powerplug is suitable for mains voltages
ranging from 100 to 240V.
You can also shave without charging by
connecting the shaver to the mains.The green
pilot light will go on during shaving.
Do not leave the shaver connected to the mains
continuously.
C
1 Put the appliance plug in the shaver.
2 Put the powerplug in the wall socket.
Do not recharge the shaver in a closed pouch.
3 When charging for the first time or after a
long period of disuse: leave the shaver to
charge continuously for 4 hours.
Charging normally takes approx. 1 hour.
A fully charged shaver has a cordless shaving time
of up to 70 minutes.
4 Remove the powerplug from the socket
and pull the appliance plug out of the
shaver when the batteries have been fully
charged.
Shaving
1 Switch the shaver on by pressing the on/off
button once.
ENGLISH
5