Short Description; Applications; Dimension Drawings - Knick SE 605 H Mode D'emploi

Short Description

Applications

The SE 605H Memosens® is a coaxial 2-electrode conductivity sensor made of stainless steel.
It has a large measuring range from ultrapure water to 1000 µS/cm. The outer and inner elec-
trodes can be detached for easy cleaning and simple O-ring replacement. A temperature
detector is integrated in the sensor.
The sensor is particularly suitable for monitoring ultrapure water in the pharmaceutical
industry, food industry, and biotechnology.

Dimension Drawings

SE 605H- _ MS H0 _ _
Coupling nut G 1 1/4"
SE 605H- _ MS J1 _ _
Set screw (3x)
Tri-Clamp
DIN 32676 DN32/40
BS 4825 1,5"
ISO 2852 DN25
Ø 25
Replacing the Sensor Gaskets
1. Remove the sensor.
2. Loosen the set screws.
3. Screw off the outer electrode with the tri-clamp.
4. Screw off the inner electrode.
5. Replace the gasket.
6. Screw on the inner electrode.
7. Screw on the outer electrode with the tri-clamp.
8. Tighten the set screws.
9. Install the sensor.
Ø 25
SE 605H- _ MS HZ _ _
Coupling nut G 1 1/4"
WARNING! Never dismantle a
sensor with clamp union as long
as it is installed. You risk injury
from the process!
11
Ø 25
All dimensions in mm