RECARO C 6000 Instructions D'utilisation page 35

2
1
4. Tip the seat to the rear and secure it as necessary.
5. Fit the cable clip (4) approx. 120mm from the front edge of the console.
6. Fit the electric plug (3) into the console (the safety latches audibly lock into place).
7. Fit the air connection (2) into the console and secure it with the removed retaining washer (1).
8. Tip the seat back to its starting position.
9. Unlock the seat rails and slide both bottom rails (1) as far back as possible by hand.
Warning (risk of entrapment):
There is a risk of your fingers being crushed or trapped when moving the seat.
I
10. Fit the vehicle connections to the air connection (1) and the electrical connection (2).
11. Activate the express down mechanism.
12. Start the vehicle in order to build up the air pressure needed for the remaining part of the installation.
RECARO Automotive Seating
3
4
1 Retaining washer
2 Air connection
3 Electric plug
4 Cable clip
1 Air connection
2 Electrical connection
Page 14