Table des Matières
Publicité
FRAMER'S
TROUBLE SHOOTING
Problem
Ragged bevel cuts
Over-Cut at the start of the
cut
Over-Cut at the end of the
cut
Cutting through at ends of
mat but not in middle
More great Logan products...
#708 Extension Table
Laminate surface board
extension that mounts on
to #650, #655 or #660
mat cutters. Allows
border sizes up to 17"
using parallel mat guide.
Foamboard Cutter -
Model 1500
Push style fixed blade
cutter can be used against
any suitable straight edge.
Reversible, it cuts 90° or
45° bevel with an
adjustable blade to a
foamboard thickness of
1/8" (3mm), 3/16" (5mm)
and 3/8" (10mm). Includes
three extra blades.
18
L o g a n G r a p h i c P r o d u c t s I n c . , 1 1 0 0 B r o w n S t r e e t , Wa u c o n d a , I L 6 0 0 8 4 To l l F r e e 1 8 0 0 3 3 1 6 2 3 2 w w w. l o g a n g r a p h i c . c o m
EDGE
Possible Reasons
Cutting without a backing sheet.
Backing sheet is worn out.
Dull or chipped blades.
Cutting head crawling forward as you
insert the blade.
Production stop set incorrectly.
Blade depth set too deep.
Production stop set incorrectly.
Adjustment needed to overcut
adjustment screw.
Pushing down on handle bar while
cutting.
Backing sheet not proper length.
Machine not on level surface.
Inconsistent pressure being applied to
blade holder during cut.
M AT C U T T E R MODELS 650, 655 & 660
Problem
Hook in the corner of the
bevel cut
Curve in the bevel cut
Cutting head hard to pull
when cutting
Logan Surface V-Groover Offers a way to cut surface
V-Grooves quickly and accurately with zero overcuts.
Push-Pull action cuts V-Grooves right on the surface
of the matboard eliminating any need for trimming or
taping. Works entirely with stops.
Logan V-Groover - Model #705
Replacement Blades - Model #1258
Freestyle Cutter - Model 1100
Push or pull style cutter with ergonomic shape and
fixed blade. Great for freestyle mat cutting. Use right
or left handed. Available in two colors: Red and
Silver. Three extra blades included.
3-Step Oval and Circle Mat Cutter is easy to use, fast
and portable. Cuts ovals or circles on the surface of
the matboard using a patented 3-step mechanism for
gradual increase of blade depth.
Converts from oval to circle cutter with a turn of a
knob. Ovals from 3
from 4
1
/
" to 20".
2
Uses common blade. Logan - Model 324, Dexter or X-
Acto equivalent.
3-Step Oval & Circle Mat Cutter - Model 201.
Replacement blades - Model 324.
Possible Reasons
Blade depth set too deep.
Cutting without a backing sheet.
Backing sheet is worn out.
Pushing down on handle bar while
cutting.
Blade depth set too deep.
Cutting without a backing sheet.
Backing sheet is worn out.
Pushing down on handle bar while
cutting.
Worn bearings.
Machine not on level surface.
Blade depth set too deep.
Did not remove backing sheet while
straight cutting.
Not pulling from center of the cutting
head.
Blade is dull.
1
/
" x 4
3
/
" to 20" x 23". Circles
4
4
Publicité
Table des Matières
