Product Presentation; Technical Specifications And Features; Installation - Shott SF15 Manuel

E N
Due to the complex nature of the cases treated, the installation, user and maintenance instructions contained in this customer manual do not seek to
examine all possible and imaginable cases of service and maintenance. Should your require additional instruction or have specific problems, please do not
hesitate to contact the distributor or the product manufacturer directly.
2.3.2. Safety warnings.
The product is not suited for people (even children) who suffer from physical, sensorial or mental handicaps or people who do not have sufficient experience
or training unless instructed on product use and assisted by a person in charge of their safety. Supervise children to ensure they do not play with the device.
Never put your hands in the water if the product (pump) is in operation.
The product (pump) must never be operated in the swimming pool when people are present.
Do not submerge the product in water.
Be sure to disconnect the power plug from the power outlet before operating on the product (pump).
Attention to the inlet/outlet points because they can trap parts of the body and/or hair and cause serious personal injuries and even death.
It is compulsory to check that the inlet ends are not blocked.
Pumps, filters, and other equipment/components of a pool filtration system can operate under pressure. If not correctly installed they can cause serious
personal injuries and even death.
Packaging materials are not children's toys. Films can be hazardous and cause suffocation.
Do not drink alcoholic beverages before, after and while swimming. Alcohol consumption may cause drowsiness, loss of consciousness and consequent
drowning.
If taking drugs that induce drowsiness (i.e.: tranquillizers, antihistamines or anticoagulants), avoid swimming in heated pools.
Prolonged immersion in hot water may cause hyperthermia
fainting, drowsiness, lethargy
failure to recognise the need to exit the pool, physical inability to exit the pool, damages to foetus for pregnant women, unconsciousness with consequent
drowning risks.
Do not use the pool if the product (filter/pump) cannot be used.
In order to protect the users' health do not use the pool immediately after treating the water, wait for a length of time compliant with the current health
regulations.

3. Product presentation.

3.1. Product scope.
These filters (product) are the most reliable nowadays in the market for the cleaning and the maintenance of your domestic swimming pool. They find their
application from children to professional's aboveground pools. Each model is provided of a multifunctional multifunctional valve that allows the application of the
product in many different ways. In particular the filters do not need special maintenance operations because working directly on the multifunctional valve they
allow their deep cleaning with no need of long and exhausting operations.
3.2. Composition.
See Fig. 3.
#
1 Multifunctional valve
Soft O-ring for the sealing between the multifunctional valve
2
and the tank
3 Closing flange
4 Funnel

4. Technical specifications and features.

See Tab. 1.
The hydraulic parts used for the building of the system which shall include the product modify the performance (head and flowrate) of the pump.

5. Installation.

5.1. Necessary tools.
See Fig. 22.
5.2. Storage features and conditions.
The product must be stored in a dry place, protected from weather.
5.3. Transport.
Handle the product with care to avoid damages.
5.4. Handling.
Be really careful when moving the product (full of filter media, sand) because it is very heavy.
5.5. Positioning.
The product must be positioned under head.
The product must be placed in an area not subject to flooding.
The product cannot be used on the water surface.
The product must always be located at least 3.5 [m] from the edge of the swimming pool from which water is drawn (Fig. 18).
It is advisable to take the following into account:
•
Dimensions and position of hydraulic parts.
•
Necessary clearance.
•
Supply cord position (pump).
•
Location of the power supply (power outlet).
•
Support and its location.
Please remember that water must be conveyed to the product through an appropriate pump (Fig. 1).
Make sure the product is positioned in a place where noise generated during normal operations does not create disturbances.
The product must run in a horizontal position. Make sure its position is not altered once it is correctly placed.
The product must be positioned in a shady and aerated place.
5.6. Connections and start-up.
The product must be installed and operated by individuals with appropriate training.
5.6.1. Drain Tap assembling.
Before mounting the product assemble the special water drain tap. (Fig. 4).
The components that form the drain tap are:
7
Increase in body temperature over physiological limits, maximum limit 37 [°C].
8
Decrease in body temperature over physiological limits, minimum limit 35 [°C].
9
State of inactivity or lack of reactivity that nears unconsciousness.
Nome file:
20.10.326 - ISTRUZIONI SF 15-200 _BIDONE SF
File name:
9
. Consequences of hyperthermia and hypothermia may be: Unawareness of imminent danger, lack of heat or cold perception,
7,
while immersion in cold water may cause hypothermia
#
5 Drain Tap
6 Tank
7 Tube with body diffuser
8 Finger
Tab. 6
16-40
8
, with symptoms such as: Dizziness,
Rev. 17 25/11/2014