To Set An Alarm - Simplex 100 Manuel D'utilisation

P
ROGRAMMING

To Set an Alarm

Use the following steps to set the Simplex 100 to ring up to 24 alarms (or bells) at a specified time
during the day or night.
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears above ALARM.
C.
Press CHANGE once.
•
The first ALARM option begins to blink.
Press CHANGE again.
•
The hours begin to blink.
Press CHANGE until the desired hour is displayed.
Press ACCEPT to set the hour shown.
•
The minutes begin to blink.
Press CHANGE until the desired minute is displayed.
Press ACCEPT to set the minutes shown.
•
The next alarm option begins to blink. Use the steps above to set additional alarms.
D. Press ACCEPT to set the alarms.
•
The programming arrow moves to the next option (go to Step C of To Set the Print
Direction).
18