To Print Numbering; To Set The Repeat Option - Simplex 100 Manuel D'utilisation

P
ROGRAMMING

To Print Numbering

You can print a number by using this option. The amount of digits for this number is definable
between 0 and 6, the number of times that number is repeated is definable between 0 (fixed) and 9,
and the starting number between 0 and 999999.
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears below NUMBER.
C.
Press CHANGE once.
•
The NUMBER option begins to blink.
Press CHANGE until the desired option number is displayed.
D. Press ACCEPT to set the COMMENT option shown on the display.
•
The programming arrow moves to the next option (go to Step C of To Set the Repeat
Option).
Note: Selecting a "0" for the PRINT NUMBER code disables the REPEAT and STARTING
NUMBER options and moves the programming arrow to the AHEAD option next to
DST (Daylight Saving Time).

To Set the Repeat Option

When selecting the Numbering option in the previous step, the programming arrow appears below
the REPEAT option. The number of times that a number is repeated is definable between 0
(prints the starting number constantly) and 1 through 9 (prints the starting number once through
nine times and then begins to print consecutively).
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears below REPEAT.
C.
Press CHANGE once.
•
The REPEAT option begins to blink.
Press CHANGE until the desired option number is displayed.
D. Press ACCEPT to set the REPEAT option shown on the display.
•
The programming arrow moves to the next option (go to Step C of To Set the Starting
Number).
14