Clearing Blockages - Vax SWIFT DUO Manuel D'instructions

Vax V-134E User Guide.qxd:V-134E User Guide
Tap the filter against the side of a rubbish bin to remove
excess dirt. Rinse the HEPA post-motor filter in luke warm
water (max 40°C.) allow to air dry for at least 24 hours
before replacing back on the dirt container (Fig 6/11).
Fig.6/11
18/2/08 15:52 Page 9

7. Clearing Blockages

WARNING: To reduce the risk of electric shock,
!
the power cord must be disconnected before
performing maintenance or troubleshooting checks.
Turn the vacuum cleaner off and unplug from the electrical
outlet.
The flexible hose can be disconnected from the vacuum
cleaner by pressing the two raised inserts on either side of
the hose connector, and pulling away from the machine.
Remove any blockages found then re-connect the hose
securely.
dirt container & filter/ clearing blockages
www.vax-france.net
9