Guarantee And Support - Philips GoStyler NT9141 Mode D'emploi

Problem
The appliance does
not work as well as it
should.
The appliance pulls at
the hairs.
The appliance works,
but the result is
uneven.
The appliance does
not work.

Guarantee and support

If you need information or support, please visit the Philips website at
www.philips.com/support or read the worldwide guarantee leaflet.
Guarantee restrictions
Cutting units are not covered by the terms of the international guarantee
because they are subject to wear.
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.
Cause
Hairs may be stuck in the
precision trimming head.
You move the appliance
too fast.
The disposable battery is
empty.
You press the appliance
onto the skin too hard.
The precision trimming
comb is not in full contact
with the skin.
The disposable battery
is empty or has been
inserted incorrectly.
Solution
Clean the precision trimming head (see chapter
'Cleaning').
Do not move the appliance too fast.
Insert a new battery.
Do not press the appliance onto the skin too hard,
as this may cause the hair length after trimming to
be shorter than the indicated hair lengths.
When you use the comb, always make sure it is
fully in contact with the skin.
Always move the appliance against the direction
of hair growth. As not all hairs grow in the same
direction, this means that you have to move the
appliance up, down and sideways.
Replace the battery or insert it correctly.
ENGLISH
9