Preparing For Use; Placing The Batteries - Philips GoStyler NT9141 Mode D'emploi

AA

Preparing for use

Placing the batteries

1 To remove the battery compartment cover, turn it clockwise until
the setting indicator points to the 'open' indication.
2 Pull the battery compartment cover off the handle.
3 Put the battery in the battery compartment.
Make sure the + and - poles of the battery point in the right direction.
Note: The appliance runs on one R6 AA 1.5-volt battery (included). Preferably
use Philips alkaline batteries. A new AA alkaline battery has an operating time
of up to 2 hours.
4 Slide the battery compartment cover back onto the handle.
5 Turn the battery compartment cover anticlockwise until the setting
indicator points to the 'off' indication.
To avoid damage due to battery leakage:
- do not expose the appliance to direct sunlight.
- do not expose the appliance to temperatures higher than 35°C.
- remove the battery if you are not going to use the appliance for a
month or more.
- do not leave an empty battery in the appliance.
ENGLISH
5