Cleaning - Sonnenkonig WENGEN Mode D'emploi

5 Cleaning

EN
TURN OF THE DEVICE AND REMOVE IT FROM THE POWER SUPPLY
Device
Every 2 weeks
If necessary, clean
the device with a
damp cloth.
Do not use caustic
or abrasive clea-
ning agents!
BEFORE CLEANING / MAINTENANCE
Remove the fi lter cover by pressing the two markers with
the inscription: „PUSH".
After pushing it in, the cover should come towards you
and you can now remove it.
HEPA-Filter
Every 2 months
After removal,
place the fi lter in
a well-ventilated
place, as previously
absorbed particles
or bacteria could
now escape.
56
Pre-Filter
Every months
Vacuum the fi lter
thoroughly with a
vacuum cleaner or
wash it under run-
ning water and let
it dry.
Cover
Every 2 weeks
If necessary, clean
the cover with a
damp cloth.