Boxis AutoShred Manuel De L'utilisateur page 7

Operation (cont'd)
Paper Clips and Staples:
Although our shredders are safe to shred the occasional standard staple, you
should remove staples whenever possible to prolong the life of the unit. For
auto feeding any stapled papers, please put the stapled side showing on top.
Industrial or non-standard, large-size staples MUST be removed. DO NOT shred
paper clips at any time as this will cause damage to the blades.
Door Locking/Unlocking:
The doors can be locked to avoid confidential papers from being taken out of
the paper tray by other people.
• Locking:
Press "ON/START" button. Paper will start to shred. Enter 4-digit PIN. Red
LED will indicate LOCK mode. Top door will be locked during shred cycle.
Top door will unlock upon completed shred job.
• Unlocking:
Enter your 4 digit PIN. GREEN LED will indicate UNLOCK mode.
• Cancel Password:
If you encounter Overload/Overheat/Door Open mode during shredding
paper, or if the locking process needs to be interrupted or cancelled, wait
20 minutes and the top cover will automatically unlock. Lift open handle
and remove paper.
Start Mode:
When pressing the Power On button, the Green LED activates and the machine
is ready for use.
Stop Mode:
When pressing the Stop button, the machine stops. The Green LED deactivates
and the machine is off.
Reverse Mode:
When pressing the Reverse button during Auto Mode operation, the motor
enters the Reverse mode. Press and hold the Reverse button in order to keep
the motor running in reverse. When the Reverse button is released, the machine
returns to Auto mode.
Forward Mode:
When pressing the Forward button, the motor enters the Forward mode.
Press and hold the Forward button in order to keep the motor running in
forward. When the Forward button is released, the machine stops and returns
to Auto mode.
7