Assembly; Operation - Boxis AutoShred Manuel De L'utilisateur

Assembly

NOTE: This shredder will operate only when used with the supplied basket. The
supplied basket has a built-in safety feature which prevents the shredder from
operating if used with any other basket or if improperly assembled.
This shredder contains sharp edges on the underside of the shredder head.
The plug on the power supply cord is intended to serve as the disconnect
device, so the socket-outlet should be installed near the equipment and should
be easily accessible.

Operation

Please read operating instructions before using shredder. Check machine for
damage or defect; remnants of paper particles found in the waste bin are normal
due to product testing.
Setup
1. With power switch in the OFF position, plug the shredder cord into the
shredder, then plug into a grounded electrical outlet.
2. Turn the ON/OFF switch to the ON position.
3. Attach media basket accessory to front of wastebasket.
4. Press the Power ON/OFF button.
5. The Power On LED will illuminate Green and the shredder is now ready for
operation.
6. Depending on quantity of paper the shredding operation can be performed
either by Auto or Manual Feed.
• Auto Feed: Lift handle and place letter-sized (8.5" x 11") sheets of paper
into tray. The machine starts shredding sheet by sheet.
• Manual Feed (max 10 sheets): The shredder can be activated with the top
door closed by inserting 10 sheets or less of paper at a time.
7. Empty the bin frequently for smooth operation and to avoid jams.
8. Turn the shredder OFF prior to removing wastebasket.
NOTE: This shredder is not designed to shred form labels. Shredding labels can
cause blades to gum up and damage unit.
For all safety purposes, turn off shredder when not in use.
6