Series 912 - Ms; Safety Instructions - Alcad 912-MS Serie Manuel D'installation Et Programmation

SERIES 912 - MS

1.

SAFETY INSTRUCTIONS

Make every A/V, RF and supply connections before connecting the units
to the mains.
Fig. 1 - Make the supply connections before connecting to the mains
To meet safety regulations, a differential cutout must protect the electric
installation. To connect the supply to the mains, use a connecting strip.
The green and yellow supply cable must be grounded to the mains.
Do not remove the supply, amplifier or
modulator lids while the unit remains
plugged to the mains. Authorised technical
staff must carry out all repairs.
manipulation of the units cancels all
guarantees.
Fig. 2 - Do not manipulate while connected
+ 50 °C
-- 5 °C
Consult your supplier if you have any doubts about the installation,
operation or safety requirements of the units.
Serie 912 - MS
Verify that the unit is properly ventilated.
installation in a chest, use a CV-001 chest with built-
in fan (Cod. 9120068) or a CP-710 chest (Cod.
9050041) together with the VE-500 ventilator (Cod.
9050043). Any unit operating beyond its range of
temperature (-5 to +50°C) may be irreversibly
damaged. Do not block or cover the ventilation
grooves of the supply or box.
Fig. 3 - Temperature range
230 V
GREEN/YELLOW
Internal
230 V
ENG - 19
For