Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Installation
5.
Installation
5.1
Fitting the kitchen tap
ø 35
5.2
Installing the appliance
f Mark out the holes for drilling using the installation tem-
f
plate, see "Installation template" chapter.
f Drill the holes and insert suitable rawl plugs.
f
f Secure the mounting bracket with suitable screws.
f
f Hang the appliance onto the mounting bracket.
f
Note
Excess cable can be stored in the cable compartment.
14
| SNU HOT | HOT 3in1
5.3
Water connection
Note
If the tap is not being connected to a central DHW supply
system, seal the connection hose with a twin connector.
Material losses
!
The strainer and the flow limiter must be installed for the
appliance to function.
Material losses
!
f Do not subject the appliance to water pressure.
f
f Do not interchange the connection hoses.
f
Fitting the hot water outlet hose
1
1 Fitted hot water outlet
You may trim the hot water hose to length, as required.
Material losses
!
Never extend the hot water hose.
Tightening the connection fittings
f Counter-hold with a suitable spanner when tightening the
f
fittings.
www.stiebel-eltron.com
Publicité
Chapitres
Table des Matières
Dépannage
