Dab/Dab+ Settings - MAJORITY OAKINGTON+ Guide D'instructions

Instructions Guide
EN

DAB/DAB+ Settings

When on DAB/DAB+ mode, press the 'Menu' button (Rem.8) on the
remote to open DAB radio settings. Once pressed, the following options
will be available to scroll through with the Previous and Next buttons
on the remote (Rem.10/25) and can then be selected to open further
setting options:
Full Scan
Select this option to initiate a scan for available DAB/DAB+ stations.
Once selected, the screen will display "Scanning... " as it scans for stations
with good signal. Once the scan is complete, the first available station
will begin to play.
DAB+ Manual Tuning
As well as an auto tune function, you can manually tune the radio to
scroll through stations by multiplex and frequency.
Once "Manual Tune" is selected, use the 'Previous' (Rem.10) and Next
(Rem.25) buttons on the remote to cycle through the DAB+ channels,
which are from 5A to 13F.
Once on your chosen station, press down the Navigate/OK dial (Ref.12)
or press the Enter/Play button on the remote (Rem.26).
11