Dab/Dab+ Radio - MAJORITY OAKINGTON+ Guide D'instructions

Instructions Guide
EN

DAB/DAB+ Radio

Fully extend the antenna (Ref.13).
Press the 'Mode' button (Ref.5) multiple times on the unit to switch to
DAB/DAB+ Radio. To select the mode from the remote, press the 'FM/
DAB' button (Rem.19).
On first use when DAB Radio is activated for the first time, a Full Station
Scan must be completed. Press the 'Menu' button (Rem.8/Ref.6). Then,
use the 'Enter/Play' button (Rem.26) on the remote or press down the
Navigate/OK dial on the unit (Ref.12) to select 'Full Scan' .
This will start a scan up the frequency band and store all stations that
have a good signal. After searching has finished it will automatically
play the first station stored.
To listen to all stations that have been stored use the 'Next' (Rem.25)
and 'Previous' buttons (Rem.10) to scroll through them.
When you turn on the radio again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected. In DAB/DAB+ mode, the radio will synchronize with the time
and date of the station.
10