Operating Features - Urmet 1096/405 Guide Rapide

Operating features

IR LED operation
The device is provided with a CDS sensor that switches the IR LEDs on when the light is
approximately 5 Lux.
Accessing the camera OSD menu
Using the UTC interface, through the use of the HVR devices in the Urmet catalogue, the OSD
menu of the cameras can be accessed by pressing the central button of the graphic interface of
the HVR remote control and then scrolling through the menus using the arrow buttons.
Refer to the respective product manuals for using the controls.
For using the 1080P and 1080N series HVRs, refer to the complete manual of these cameras
which can be downloaded from Urmet website (see below).
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste
electrical and electronic equipment (WEEE).
The crossed-out wheeled bin symbol on the product or on its packaging indicates that the product must not be
disposed of together with ordinary household waste.
The user must therefore dispose of the waste equipment by taking it to a designated collection centre for the
recycling of waste electrical and electronic equipment. As an alternative to independent disposal, you can hand
in the equipment you wish to dispose of to the retailer when purchasing a new appliance of the same type.
Electronic products up to 25 cm in size can also be handed in for free disposal, with no purchase obligation, at electronics
stores with sales areas of over 400 m
Adequate separate collection for recycling, treatment and environmentally friendly disposal of the scrapped equipment helps
to prevent negative impacts on the environment and on human health, and promotes recycling and/or reuse of the materials
with which the equipment is made.
QR Code
Quick guide and complete user manual of the products are also available for DOWNLOAD from the URMET
website under the section DOCUMENTATION AND RESOURCES at the following links:
.
2
1096/405
9
1096/505
EN