Program Setting - Gram BAKER GA 500 Mode D'emploi

Program setting

Setting program parameters
When the cabinet is in stand-by mode, pressing
on the display: Pr1, Pr2, Pr3, Pr4 and Pr5.
The various settings for the selected program can be accessed by repeatedly pressing P.
The setting for any selected parameter can be altered by pressing
continue scrolling through the program parameters. When altered, settings are automatically
saved.
Program parameters:
Display indication Range
Pr1 Pr 1 to Pr 5
-25 C to +5 C
-15C ChiL
3.00 ChiL 0.00 to 9.00 hrs./min.
-25 C to +5 C
-10C Stor
-5 C to +9 C
2C rEtA
75F rEtA 40 to 98 % RH
6.00 rEtA 1.00 to 10.00 hrs./min. Retarding
+10 C to +40 C
30C Pro
75C Pro 40 to 98 % RH
3.00 Pro 1.00 to 10.00 hrs./min. Proving
3.30 End 0.00 to 23.50
Mon End Monday to sunday
0.10 rEtA 0.00 to 0.30 hrs / min
0 C to +40 C
20 C hold
75 F hold 40 to 98 % RH
Starting and stopping the program
The various steps in a control program can be started manually and used individually. In other
words, the cabinet can be used for storage, thawing or proving indefinitely.
With correct programming, some of the programs can be combined. The following combinations
are possible:
 Chilling followed by indefinite storage.
 Chilling followed by storage and then indefinite defrosting.
 Complete program with chilling, storage, thawing and indefinite proving.
765041584
–
+
or toggles between the 5 programs shown
LED indication Description
- Programme selection.
Chilling Temperature setpoint
Chilling Chilling time
Storage Temperature setpoint
Retarding Temperature setpoint
Retarding Relative humidity setpoint
Retarding time setting
Proving Temperature setpoint
Proving Relative humidity setpoint
Proving time setting
- Process end time
- Process end day
Retarding/Proving Extra time - proving
Retarding/Proving Temperature - cooling
Retarding/Proving Relative humidity - cooling
Rev 000
–
+
or . Press P again to
46