Maintenance And Cleaning; Technical Data - IKA Vortex 3 Mode D'emploi

The device is maintenance-free. It is only subject to the natural
wear and tear of components and their statistical failure rate.
Cleaning
- For cleaning disconnect the mains plug!
- Use only cleaning agents which have been approved by IKA to
clean IKA devices.
These are water (with tenside) and isopropanol.
- Wear protective gloves during cleaning the devices.
- Electrical devices may not be placed in the cleansing agent for
the purpose of cleaning.
- Do not allow moisture to get into the device when cleaning.
- Before using another than the recommended method for clea-
ning or decontamination, the user must ascertain with IKA that
this method does not destroy the device.
- The rubber of the attachments' pads (V 3.2 and V 3.3) is a natu-
ral product, so talcum can discharge. Clean the rubber pad with
glycerin.
Operating voltage
Design frequency
Input power
Output power

Maintenance and cleaning

Ordering spare parts
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item number and designation of the spare part,
see www.ika.com.
Repair
Please send instrument in for repair only after it has been
cleaned and is free from any materials which may constitu-
te a health hazard.
For this you should request the "Safety Declaration (Deconta-
mination Certificate)" from IKA, or use the download printout
of it from the IKA website www.ika.com.
Return the instrument in its original packaging. Storage packaging is
not sufficient. Also, please use suitable shipping package materials.

Technical data

Vac
Hz
Vac
Hz
Vac
Hz
W
W
(220 ... 240) ± 10%
50/ 60
115 ± 10%
60
100 ± 10%
50/ 60
60
10
13