Table des Matières
Publicité
EN
Operation
Installing the Safety System
Product components
If the device is to be used outside or for tall surfaces, the safety system must be
attached to the robot and to the window before use.
PLEASE NOTE: If there is a power cut lasting more than 30 minutes, the device may fall down
(the emergency battery has a battery life of approx. 30 minutes).
Preparation
Loop one end of the safety tether (2)
around the end of the power cable (1)
and tighten.
Connect end A and end B, twist clockwise
and tighten.
1. Power cable
2. Safety tether
3. Safety suction cup
6
Publicité
Chapitres
Table des Matières
