Start - NRG ENERGY RWC-1 Manuel D'instructions

EN
Operation

Start

Product components
1. Power switch
2. Start/Stop button of the robot
3. Start/Stop button of the remote control
Connecting the robot to the mains
The robot is correctly connected to the mains when the top indicator light
flashes blue.
PLEASE NOTE: Do not disconnect the device from the mains during this time, as it might fall
to the ground.
Switching on the robot
Push down the power switch (1). The robot's top indicator light (2) should flash
blue. ENERGY RWC-1's suction fan is activated. The device can now be placed
on the surface that requires cleaning.
9