Preparing And Using The Cleaning Pads - NRG ENERGY RWC-1 Manuel D'instructions

EN
Operation

Preparing and Using the Cleaning Pads

Front cleaning pad
The front cleaning pad is designed for active cleaning of the surface with special
window cleaning solutions.
Attach the front cleaning pad to the device using the hook-and-loop strip.
Lightly spray the pad with the cleaning solution.
Please ensure that the pad is properly attached.
PLEASE NOTE: The pads can be used with all standard cleaning solutions for glass surfaces.
Rear cleaning pad
This pad dries the window surface after it has been cleaned by the front cleaning
pad.
Flip the device and attach the cleaning pad to the bottom of the robot using the
hook-and-loop strip.
PLEASE NOTE: Please ensure that the cleaning pads cover neither the rubber blade nor the
robot's edge sensors.
1. Front cleaning pad
2. Rear cleaning pad
8