NRG ENERGY RWC-1 Manuel D'instructions page 12

EN
Operation
Placing the device on the window surface
Put the device on the window surface, ensuring a
minimum distance of at least 10 cm from the
10 cm
window frame and other obstacles.
10 cm
Start
Approx. 15 seconds after the device is placed on the surface that requires
cleaning, the top indicator light turns permanently blue. The device is now
ready to start the cleaning cycle.
You can start a cleaning cycle as follows:
• Press the Start/Stop button on the handle of the robot (2).
• Press the Start/Stop button on the remote control (3).
Selecting the cleaning mode
Automatic: Before the cleaning cycle starts, the robot registers all surface
bounds to analyse the shape of the glass surface and adapt its cleaning path
accordingly.
Selectable modes: You may use the remote control to select one of four
cleaning modes:
10