Name Of Parts And Operation Selector Switch; Indoor Unit; Outdoor Unit; Cool / Dry / Heat Models - Technibel Climatisation MCA20C Notice D'utilisation

NAME OF PARTS AND OPERATION SELECTOR SWITCH

INDOOR UNIT

COOL / DRY / HEAT Models

1. Remote control unit.
2. Sensor: Detects the room temperature around the remote
control unit, the air conditioner is controlled accordingly.
3. Air outlet : distributes filtered and treated air into the room.
4. Air inlet : room air is sucked in through filters.
5. Receiver : receives signals transmitted from the remote control.
6. Flexible drain tube: removes condensate.
4
INDOOR UNIT
3
2
1

OUTDOOR UNIT

8
5
OPERATION lamp
TIMER lamp
STANDBY lamp
7. Refrigerant tubes: convey refrigerant between the indoor
and outdoor unit.
8. Operation selector.
ON Position:
OFF Position:
3
6
7
In this position the air conditioner is operating
and controlled by the remote control unit.
Set the selector normally in this position.
Switch the selector to the off position if you
are not going to use the air conditioner for
a few days or longer.
EG
5
OPERATION lamp
TIMER lamp
COOL / DRY Models