Grizzly BRV 400 S Traduction De La Notice D'utilisation Originale page 67

Preparations:
• Never allow children and people
who are not familiar with these
Operating Instructions to use
the implement. Local regulati-
ons may stipulate a minimum
age for operators.
• Never start up the implement
while other people, but espe-
cially children and domestic
pets, are in the vicinity.
• Check the area on which the
implement is to be used. Remo-
ve all stones, sticks, wire and
other foreign bodies that could
be caught up and flung out.
Never use the implement to le-
vel out uneven patches.
• Always wear appropriate pro-
tective work clothes and firm
shoes with non-slip soles,
strong long trousers, ear defen-
ders and goggles. Never ope-
rate the implement while bare
footed or when wearing open
sandals.
• Never operate the implement
if it is damaged, incomplete or
has been modified without the
consent of the manufacturer.
Never work with damaged or
missing protective devices (e.g.
starting lever, unlocking knob,
impact protector).
• Never disengage protective de-
vices (e.g. by tying the starting
lever).
• Children must be supervised in
order to ensure that they do not
play with the equipment.
• Before starting the equipment,
ensure that no objects are pus-
hed into the blade opening, that
the equipment is standing stably
and that the workspace is tidy
and not blocked.
• Warning: Petrol is highly flam-
mable. Fire or explosions can
result in serious burns:
- Keep petrol only in containers
intended for this purpose;
- Only refuel outdoors and do
not smoke whilst refuelling;
- Fill with petrol before starting
the engine. Do not open the
filler cap or refill with petrol
whilst the engine is running or
the equipment is hot:
- If petrol is spilled, do not at-
tempt to start the engine. In-
stead, remove the equipment
from the surface on which the
petrol has been spilled. Avoid
any ignition attempt until the
petrol fumes have evaporated;
- For reasons of safety, replace
petrol and other filler caps in
the event of damage.
• Replace defective silencers.
Use:
• Do not run the combustion engi-
ne in enclosed spaces, in which
dangerous carbon monoxide
can collect.
• CAUTION – A very sharp tool.
Avoid cutting your fingers or
toes. While working always
keep your feet and fingers well
away from the cutting cylinder
and the ejector opening. There
is the danger of serious injury!
• Work only in daylight or with
good artificial lighting. An unlit
working area can result in acci-
dents.
GB
67