Safety Instructions; Symbols / Instructions On The Implement - Grizzly BRV 400 S Traduction De La Notice D'utilisation Originale

The manufacturer cannot be held liable for
damage caused by incorrect operation of
the implement or if it is not used in confor-
mity with its intended purpose.

Safety instructions

This section covers the basic safe-
ty instructions when working with
this implement.
Symbols / Instructions on
the implement
WARNING!
These Instructions must be
read!
Danger of injury due to flung-
out material! Keep bystanders
well away from the imple-
ment.
CAUTION – Sharp tools:
Ensure that the hands and
feet are kept well away from
the cutting tools. The cutting
cylinder continues to rotate
briefly after the motor has
been switched off!
Caution – risk of injury!
Before maintenance work,
switch off the engine and take
out the spark plug connector.
Caution – toxic fumes!
Do not operate the equipment
in enclosed areas.
Caution – petrol is flammable!
Do not smoke and keep away
from heat sources
Caution – hot surfaces!
Risk of burning.
Do not expose the equip-
ment to the damp.
Caution – risk of injury!
Wear eye and ear protection
Caution with steps! Turn
off the power when the
implement is to be car-
ried across steps!
Noise level ratings L
dB(A)..
400 mm Working width
Transport position
This position sets the ma-
ximum safety spacing bet-
ween the tool and the floor.
Working position
Set this position when wor-
king with a new implement.
GB
in
WA
65