Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION CONT.
4. Torque all 5/16 lock nuts to 17 lb. ft. (12.5
N-m).
5. Install the winch on top of the assembled
roller fairlead and plate supplied with the
winch. See Figure 4.
6. Use hardware supplied with winch to mount
the winch and roller fairlead bracket to the
winch mounting plate as shown in Figure 5.
Torque hardware to 17 lb. ft. (12.5 N-m).
7. Reinstall skid plate using factory hardware.
Figure 6 shows completed installation.
NOTE: Wire winch according to instruc-
tions found in winch kit.
PAGE 5
Figure 4
Figure 5
Figure 6
83132A0
Publicité
Table des Matières
