Replacing The Internal Windscreen - AKG D7 Mode D'emploi

Should the sound remain dull even after cleaning the wind-
screen, you can replace the original internal windscreen with
the extra windscreen supplied with the microphone:
1. Unscrew the front grill from the microphone CCW.
2. Remove the internal windscreen from the front grill.
3. Wet the extra windscreen with a few drops of water and
squeeze the windscreen a couple of times, to the point that
it assumes the correct shape.
4. Allow the extra windscreen to dry.
5. Insert the extra windscreen into the front grill.
6. Screw the front grill on the microphone CW.
D 7/D 7 S/D 7 LTD
4 Cleaning
4.4 Replacing the
Internal Windscreen
19