Radio Frequency Interference - Motomaster ELIMINATOR 011-1905-6 Guide D'utilisation

11
•Light:
Staring directly into the light beam of the
flashlight may result in permanent eye injury. The product
is equipped with a high output LED pre-focused lamp that
emits a powerful beam at the highest setting.
•Cleaning:
Power off the product before attempting
any maintenance or cleaning. Clean and dry product
immediately if it comes in contact with liquid or any type of
contaminant. Use a soft, lint-free (microfibre) cloth. Avoid
getting moisture in openings.
•Explosive Atmospheres:
Obey all signs and
instructions. Do not operate product in any area with a
potentially explosive atmosphere, including fueling areas
or areas which contain chemicals or particles such as
grain, dust or metal powders.
•High-Consequence Activities:
This product is
not intended for use where the failure of the product could
lead to injury, death or severe environmental damage.

•Radio Frequency Interference:

Product
is designed, tested, and manufactured to comply with
regulations governing radio frequency emissions. Such
emissions from the product can negatively affect the
operation of other electronic equipment, causing them to
malfunction.
•MotoMaster FCC Compliance
®
This device complies with Part 15 (Radio Frequency
Devices) of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a