Static Alignment - Blatchford ESK+ 4-Bolt Instructions D'utilisation

7 Static Alignment

The instructions in this section are for practitioner use only.
Walking Trials
Spring Stack Adjuster
Fully extend limb to access the adjuster.
Rotate the SPRING STACK ADJUSTER to
achieve the required stability for the
individual amputee.
Note... Audible clicks should be heard upon
adjustment, and the adjuster is self locking.
Tighten the SPRING STACK to reduce stability.
Release the SPRING STACK to increase stability
- See above.
If required, the adjuster may be reset to
the factory setting. This can be achieved by
reducing stability by six audible clicks from
the maximum stability setting.
Increase
Decrease
Stability
Stability
Underside View of Chassis
9
Build Line
Trochanter
Knee Pivot
Ankle Centre
938404PK1/1-0121