Troubleshooting Guide - Kenwood MultiPro FP925 Instructions

troubleshooting guide

Problem
The processor will not operate
Liquidiser or mini chopper/mill
will not operate
Processor stops during
processing
Poor performance of
tools/attachments.
Cause
No power/indicator light not lit.
Bowl not locked on correctly.
Lid not locked correctly.
Wrong base used.
Processor overloaded/maximum capacities
exceeded.
Lid unlocked.
Refer to hints in relevant "using the attachment" section. Check attachments are assembled correctly.
Solution
Check processor is plugged in
Check bowl is located correctly and the handle is
situated towards the right hand side.
Check that the lid interlock is located correctly into
the handle area.
The processor will not work if the bowl and
lid are fitted incorrectly.
If none of the above check the fuse/circuit breaker in
your home.
The mini chopper/mill base is not
interchangeable with the FP925 liquidiser
jug. The processor will not operate if the
wrong base is fitted. Check graphic is correct on
base used.
Check maximum capacities stated under "to use your
food processor".
Check lid is locked correctly.
9