In Case Of A Power Failure; Surface Burners - GE JGP3030 Mode D'emploi

In Case of a Power Failure

In the event of a power failure, the surface burners may
match near the ports beneath the surface burner cap,

Surface Burners

Lighting a Surface Burner
WARNING
Burners should be operated only
when covered by cookware. Burner flames not
covered by cookware present a risk of fire or
clothing ignition. Never let flames extend beyond the
sides of the cookware. Failure to comply may result
in serious injury.
Make sure all burners are in their correct locations and
fully assembled before attempting to operate any burner.
Selecting a Flame Size
Watch the flame, not the knob, as you adjust heat. When
rapid heating is desired, the flame size should match the
size of the cookware you are using. Flames larger than
the bottom of the cookware will not heat faster and may
be hazardous.
Using the Surface Burners
NOTES:
time without cookware on the grate. The finish on the
grate may discolor or chip without cookware to absorb
the heat.
another burner is on. Damage to the product
may occur.
place your hand, a pot holder or cleaning materials
on them.
Types of Surface Burners
Round Burner (on some models)
Size cookware appropriately to the flames.
surface burners will continue to operate normally.
the sound of the electric spark
igniting the burner. When one
burners will spark. Sparking will
continue as long as the knob
ignited, turn the knob to adjust
the flame size.
These flames are too large for the pot
Your cooktop has sealed gas burners that offer
convenience, cleanability and flexibility for a wide range
of cooking applications.
The smallest burner is the simmer burner. A simmer
performance for foods such as delicate sauces that
require low heat for a long cooking time.
The extra-large burner is designed to quickly bring
large amounts of liquid to a boil. Some models have a
Gas on Glass Burner Multi-Ring Burner (on some models)
(on some models)
simmering applications.
49-80801