ResMed S7 Lightweight Manuel De L'utilisateur page 16

7 Connect the power cord to the socket at the rear of the R
Plug the other end of the power cord into a power outlet and turn the power on.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The R
8 M S7 L
ES ED
.
P
ASSOVER
A C
LTITUDE OMPENSATION
Changes in altitude will affect the pressure delivered by the R
The device has a feature which compensates for these changes in altitude.
As you move or travel with the R
altitudes, you will need to adjust the altitude compensation setting in the device. To
change the altitude compensation setting, see "Using the Menus" on page 14.
There are three altitude settings to choose from:
Altitude Settings
0–2000ft
2001–4000ft
4001–7000ft
For example, if you are at an altitude of 3107ft (947m), your altitude compensation
setting would be 2001–4000ft (611–1219m), as 3107ft (947m) falls within that range.
Note: If you are above 7000ft (2134m), consider consulting your clinician.
is now ready for use with the H
IGHTWEIGHT
M
ES ED
(0–610m)
(611–1219m)
(1220–2134m)
M
ES
M
ES
to areas of different
S7 L
IGHTWEIGHT
.
S7 L
ED IGHTWEIGHT
or ResMed
A
UMID IRE
.
S7 L
ED IGHTWEIGHT
P U
REPARING FOR SE
13