Pioneer DEH-P6100BT Mode D'emploi page 58

Appendix
Additional Information
The USB device
connected to is
N/A USB
not supported by
this unit.
CHECK USB
The USB connec-
tor or USB cable
is short-circuited.
The connected
USB portable
audio player/
USB memory
consumes more
than 500 mA
(maximum allow-
able current).
ERROR-19
Communication
failure
ERROR-23
USB device is
not formatted
with FAT16 or
FAT32
58
En
Connect a USB
portable audio
player or USB
memory that is
USB Mass Storage
Class compliant.
Confirm that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
Disconnect the
USB portable
audio player/USB
memory and do
not use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect the com-
pliant USB porta-
ble audio player/
USB memory.
Perform one of the
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB portable
audio player/USB
memory.
–Change to a dif-
ferent source.
Then, return to the
USB portable
audio player/USB
memory.
USB device should
be formatted with
FAT16 or FAT32.
iPod
Message Cause
ERROR-19
Communication
failure
iPod failure
ERROR-16, 18 Old version of
iPod
iPod failure
ERROR-A1 iPod is not
CHECK USB charged but op-
erates correctly
NO SONGS No songs
STOP
No songs in the
current list
NO DEVICE
The USB storage
device or iPod is
not connected to
the USB port of
this unit.
Action
Disconnect the
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
Reset the iPod.
Disconnect the
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
Reset the iPod.
Update the iPod
version.
Disconnect the
cable from iPod.
Once iPod main
menu is displayed,
connect the cable
again.
Reset the iPod.
Check if the con-
nection cable for
iPod shorted out
(e.g., not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON or discon-
nect the iPod and
connect again.
Transfer the songs
to iPod.
Select a list that
contains the
songs.
Connect a compa-
tible iPod.