Set Up "Tv Control Mode; Notes - DREAM MULTIMEDIA DREAMBOX DM 7000-S Mode D'emploi

12. Set up "TV control mode"

12. Set up "TV control mode"
A four-digit TV device code is selected from the TV model list in the table in
Chapter 13 (pages 23 - 32) and entered.
TV mode -> <<Set-up>> -> number -> number -> number -> number
<<Set-up>>
TV mode
Numeric keypad
Programming sequence:
1. Briefly press the TV key once.
2. Press the SHIFT/Set-up key for 3 seconds. The TV key should blink twice.
3. Enter the TV code with the numeric keypad on the remote control.
Each number input is acknowledged by the TV key blinking once.
After the fourth digit has been input, a valid code is acknowledged by the
TV key blinking twice.
4. The remote control now automatically leaves programming mode.
5. If no code is input for 10 seconds, the remote control automatically leaves
programming mode.
52
12. Set up "TV control mode"

Notes

53
Notes