Télécharger Imprimer la page

Getting Started; Hifi Amplifier; Analog; Digital - DREAM MULTIMEDIA DREAMBOX DM 7000-S Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

4. Safety instructions
Do not expose your Dreambox to direct sunlight, lightning or rain.
Earthing: the LNIB cable must be earthed.
The earthing system must conform to SABS 061.
Cleaning: remove the power cable of the Dreambox from the mains socket
before you clean the Dreambox. Use a slightly damp cloth without cleaning
agents.
Connect your Dreambox only to sockets which are intended for the purpose.
Do not allow the unit to become overloaded.
General:
Environmental temperature +15°C ... +35°C
Atmospheric humidity < 80%
Dimensions (W x D x H): 374 mm x 230 mm x 63 mm
Weight: 1.8 kg without HDD
38
4. Safety instructions
5. General notes
Check that everything has been delivered. You should have received the
following:
1 receiver
1 power cable
1 remote control
1 Instruction Manual
1 guarantee card
2 batteries (1.5V microcell)
Optionally available:
2 hard disk installation frames
1 IDE cable
1 power cable for the hard disk
1 infrared keyboard
- Check the battery polarity carefully and install the batteries supplied in the
battery compartment of the remote control.
- Before you connect the receiver, please read the safety instructions under
point 2.
- Connect the external device (Spiegel, LNB) with an F plug to the LNB input
on the receiver.
- Connect the receiver with a Scart cable to your television (Scart socket
TV), and to a video recorder or DVD player (Scart socket VCR).
- Plug the mains cable into the receiver and then into a suitable power
socket 230V / 50Hz.

5.1 Hifi amplifier

5.1.1 Analog

To connect your Dreambox to a hifi amplifier, please use a suitable phono
cable Connect this to the receiver at AUDIO R/L and to a free input (e.g. AUX
or CD) on your hifi amplifier.

5.1.2 Digital

If your amplifier has a suitable optical input, connect the DIGITAL AUDIO
socket on the receiver to the optical input of the amplifier with an optical
cable. Sampling frequencies of 16, 22.05, 24, 32, 44.1 and 48 kHz are availa-
ble. This output also provides the Dolby Digital-Signal (AC3) when this is
broadcast.

5. Getting started

39
5. Getting started

Publicité

loading