Rs 232 Serial Interface; Ethernet; Disposal Notes; Important Notes On Operation - DREAM MULTIMEDIA DREAMBOX DM 7000-S Mode D'emploi

5. Getting started, 6. Disposal notes, 7. Operating notes

5.2 RS 232 serial interface

The RS 232 interface is used to update the operating software and for pre-
programming with a PC.

5.3 Ethernet

The Ethernet interface can be used to update the operating software and for
pre-programming with a PC.

6. Disposal notes

The packaging of the DM 7000 consists exclusively of recyclable materials.
Please dispose of these appropriately.
Take care that dead batteries from the remote control and electronic scrap
are not disposed of in ordinary rubbish, but are properly disposed of (return
to the specialist dealer, or special waste disposal).

7. Important notes on operation

The operation of the Dreambox is greatly simplified with an OSD (On Screen
Display). All available options are displayed over 4 coloured dots (red, green,
yellow, blue) and can be activated with the remote control.
The options change depending on the menu, and are labelled appropriately in
each menu.
You can leave all menus and channel lists with the LAME! key.
40
5. Getting started, 6. Disposal notes, 7. Operating notes

8. Main menu

This OSD (On Screen Display) is used to navigate to the individual submenus.
TIMER - mode
Switches to file mode.
SCART - menu
Switches the Scart between video input and output.
TV - mode
Switches to TV mode.
RADIO - mode
Switches to radio mode.
FILE - mode
Switches to file mode.
INFO - menu
Switches to the Info menu.
POWER OFF - mode
Puts the Dreambox into deep standby.
SET-UP - menu
Switches to the Set-up menu.
8. Main menu
41