Keyboard Overview - KERN VHB Mode D'emploi

6.6 Keyboard overview

Each key provides an operating as well as an input function.
Operating function
Zero setting and
TARE
automatic tare
PRE-
Input of tare
TARE
TOTAL Adding
KERN VHB
Adding
Printing
KERN VHS
On / Off
ON/ OFF
UNIT
IMPORTANT
The actuation of a key will only be accepted if the load is stable and the message
"load stable" is lit up. The display unit only carries out functions as long as the load is
stable.
WARNING
If the weighed weight exceeds the set maximum, the display will show: "ERRO2". To
prevent damage to the display unit or the weighing cells, please lighten the load of
the weighing system instantly.
SLANT
The verifiable model of the weighing system will display stripes only if a slant
exceeds 2°. If this is the case, place the weighing system on an even base.
10
Confirm and enter numeric
values. Shifts the flashing digits
to the left
Entering numeric values:
Decreases the numeric value of
flashing digit by 1.
Entering numeric values:
Increases the numeric value of
flashing digit by 1.
Entering numeric values:
Increases the numeric value of
flashing digit by 1.
Delete
VHB/VHS-BA-e-1613