Nutri Ninja Nutri Bowl DUO NN100 Série Instructions page 4

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic
safety precautions must always be followed, including the following numbered
warnings and subsequent instructions�
23 Keep hands, hair, and clothing out of the
container when loading and operating.
24 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja.
25 During operation and handling of the
appliance, avoid contact with moving parts.
26 DO NOT operate the appliance with an
empty container.
27 DO NOT fill containers past the max fill or
max liquid lines.
28 DO NOT microwave any containers or
accessories provided with the appliance.
29 DO NOT perform grinding operations with
the Nutri Ninja cups and Pro Extractor
™
Blades Assembly.
™
30 Before operation, ensure that all utensils
are removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
5 1-877-646-5288
31 Keep hands and utensils out of container
while chopping to reduce the risk of severe
personal injury or damage to the blender/
food chopper. A scraper may ONLY be
used when the food chopper is not running.
32 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
that the container and lid are properly
installed before operation.
33 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
34 NEVER leave the appliance unattended
while in use.
35 DO NOT blend hot liquids. Doing so may result
in a pressure buildup and steam exposure that
can pose a risk of the user being burned.
36 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a spatula to dislodge
ingredients. NEVER insert your hands into
the pitcher, as you may contact one of the
blades and experience a laceration.
37 DO NOT attempt to remove the container
and lids from the motor base while the
motor and blade assembly is still spinning.
Allow the appliance to come to a complete
stop before removing lids and containers.
38 Upon completion of processing, ensure
that the quad blade assembly is removed
BEFORE emptying bowl contents. The
quad blade assembly is to be removed by
grasping the top of the shaft and lifting from
the bowl. Failure to remove the quad blade
assembly before emptying the bowl results
in a risk of laceration.
SAVE THESE INSTRUCTIONS
39 Remove the Pro Extractor Blades
™
Assembly from the Nutri Ninja cup upon
™
completion of blending. DO NOT store
ingredients before or after blending them in
the cup with the blade assembly attached.
Some foods may contain active ingredients
or release gases that will expand if left in
a sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid to cover.
40 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
41 The maximum wattage rating for this
appliance is based on the configuration of
the Pro Extractor Blades Assembly and
™
Nutri Ninja Cup. Other configurations may
draw less power or current.
n i n j a k i tc h e n . c o m 6