Nutri Ninja Nutri Bowl DUO NN100 Série Instructions page 10

USING YOUR NUTRI BOWL
IMPORTANT: Review all
warnings on pages 3-6
before proceeding.
NOTE: Auto-IQ programs
™
have pauses and changes in
speed throughout the cycle.
NOTE: Please follow the same
instructions for the dough
blade assembly.
6 Place the lid on top of
the bowl, then turn the lid
clockwise until you hear an
audible click or the arrow
on the lid tab aligns with
the arrow on the bowl's
spine. When the unit is
connected to power and
the container is correctly
locked into the motor
base, the program buttons
will illuminate and the unit
is ready for use.
17 1-877-646-5288
- CONT�
™
7 Select the program that
best suits your recipe.
The Auto-iQ ™ feature will
automatically stop the
appliance at the end of
the program. Non-Auto-
iQ settings will continue
to run until the appliance
is stopped. To pause the
appliance at any time,
press the currently active
button a second time.
Reference page 9 for
program descriptions.
8 To remove the bowl from 9 Remove the lid by twisting
the motor base, turn the it counterclockwise and
bowl counterclockwise lifting up. Always remove
and then lift it off the the quad blade assembly
motor base. before emptying any of the
ingredients in the bowl. To
remove the quad blade
assembly, carefully grasp it
by the top of the shaft and
lift it out of the bowl.
10 Unplug the appliance
when finished and release
the motor base from the
work surface. To release
the motor base, gently
pull it toward you. Refer
to page 20 for storing
instructions.
n i n j a k i tc h e n . c o m 18