Audio Output Signals - Sony BDP-CX960 Mode D'emploi

Audio Output Signals

The audio output differs as follows, depending on the source, output jack, and the selected
settings.
Jacks/
*1
settings
Disc/source
BD LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
Dolby Digital
Plus
Dolby TrueHD
DTS
DTS-HD High
Resolution
Audio
DTS-HD Master
Audio
DVD LPCM
Dolby Digital
DTS
CD LPCM
DTS 5.1 MUSIC DISC
*1
When "Audio Output Priority" is set to "Stereo
Analog," LPCM 2ch signals are output from
each jack.
*2
When "Audio Output Priority" is set to "HDMI"
or "Coaxial/Optical," LPCM 2ch signals are
output from jacks other than the selected jack.
*3
Auto: when "Audio (HDMI)" is set to "Auto" in
the "Audio Settings" setup (page 66).
2ch PCM: when "Audio (HDMI)" is set to "2ch
PCM" in the "Audio Settings" setup (page 66).
*4
Bitstream: when "Dolby Digital" is set to
"Dolby Digital" or "DTS" is set to "DTS" in the
"Audio Settings" setup (page 67).
*5
When "BD Audio Setting" is set to "Direct,"
audio recorded by the source is output by
bitstream. However, this audio may be output as
follows depending on the audio formats
supported by the AV amplifier (receiver).
– When the AV amplifier (receiver) does not
support HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) but supports Multi-ch
LPCM, up to LPCM 7.1ch is output.
Digital
*2
HDMI OUT jack
*3
Auto 2ch PCM
LPCM 2ch LPCM 2ch
LPCM 5.1ch LPCM 2ch
LPCM 7.1ch LPCM 2ch
*5
LPCM 5.1ch LPCM 2ch
*5
LPCM 7.1ch LPCM 2ch
*5
LPCM 7.1ch LPCM 2ch
*5
LPCM 5.1ch LPCM 2ch
*5
LPCM 7.1ch LPCM 2ch
*5
LPCM 7.1ch LPCM 2ch
LPCM 2ch LPCM 2ch
Dolby Digital LPCM 2ch
DTS LPCM 2ch
LPCM LPCM 2ch
DTS LPCM 2ch
DIGITAL OUT (OPTICAL/
*2
COAXIAL) jacks
*3 *4
Bitstream PCM
LPCM 2ch LPCM 2ch
LPCM 2ch LPCM 2ch
LPCM 2ch LPCM 2ch
Dolby Digital/
LPCM 2ch
*6
LPCM 2ch
Dolby Digital/
LPCM 2ch
*6
LPCM 2ch
Dolby Digital/
LPCM 2ch
*6
LPCM 2ch
DTS/
LPCM 2ch
*6
LPCM 2ch
DTS/
LPCM 2ch
*6
LPCM 2ch
DTS/
LPCM 2ch
*6
LPCM 2ch
LPCM 2ch LPCM 2ch
Dolby Digital LPCM 2ch
DTS LPCM 2ch
LPCM 2ch LPCM 2ch
DTS LPCM 2ch
– When the AV amplifier (receiver) does not
support HD Audio or Multi-ch LPCM but
supports Dolby Digital/DTS, a Dolby Digital
or DTS bitstream is output.
– When the AV amplifier (receiver) does not
support HD Audio, Multi-ch LPCM or Dolby
Digital/DTS, LPCM 2ch is output.
*6
The 2-channel or less-channel primary/
secondary audio signals are output as LPCM 2ch
signals.
b
When outputting 480i/480p video signals from the
HDMI OUT jack, Dolby TrueHD and DTS-HD
Master Audio are output as LPCM, Dolby Digital,
or DTS bitstream signals even if "BD Audio
Setting" is set to "Direct" in the "Audio Settings"
setup (page 66).
Analog
AUDIO OUT
(L/R) jacks
2ch
2ch
2ch
2ch
2ch
2ch
2ch
2ch
2ch
2ch
2ch
2ch
2ch
2ch
83
US