La-Z-Boy Luxury-Lift Mode D'emploi page 4

Assembly Instructions:
WARNING
– To reduce the risk of serious injury:
• Do not operate the unit until the back is installed and locked.
NOTICE:
– To reduce the risk of product damage:
• Never operate the unit until the shipping cable tie has been removed from the mechanism.
Assembly Instructions
Back assembly not required for Platinum Series lift chairs. For Platinum lift chairs, proceed
directly to the online Operating Instructions at la-z-boy.com/Support/Product-Manuals for
comprehensive instructions, including safety instructions, electrical connections and operating
instructions. Do not plug in until instructed.
For Gold and Silver Series lift chairs:
1. Carefully cut the cable tie securing the lift base (F
2. Align the brackets on the back with the brackets on the body (F
• The back brackets may be located on the outside or inside of the back assembly.
3. Lower the back onto the body, making sure the back and body brackets are completely engaged.
4. Push the locking levers down to lock the brackets (F
• If you are unable to install the back properly, contact your La-Z-Boy
for assistance.
1).
IGURE
2).
IGURE
3).
IGURE
® dealer
Assembly Instructions:
F 1
IGURE
Gold Series
Luxury-Lift Chairs
Cable Tie
F 2
IGURE
Body
Bracket
Back
Bracket
Do not plug in until instructed. Proceed to the Operating Instructions at
la-z-boy.com/Support/Product-Manuals for complete assembly instructions including
electrical connections, back installation, operating instructions and safety instructions.
For fabric and leather care and cleaning instructions, visit la-z-boy.com/Support/Fabric-Care
To learn more about the proper care of your La-Z-Boy furniture, visit la-z-boy.com/CustomerCareVideos
If you do not have internet access, contact your La-Z-Boy dealer. If you are unable to reach your
La-Z-Boy dealer, call La-Z-Boy Comfort Care at 855-80-COMFORT (or 855-802-6636).
Silver Series
Luxury-Lift Chairs
Cable Tie
F 3
IGURE
Back
Locking
Bracket
Lever
Locked
Position