Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Battery installation/Battery charging
When the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
MbN: Select the desired setting. a MSAVEN a MOFFN
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit's operating
instructions.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
R Do NOT use alkaline/manganese/Ni-Cd batteries.
R Confirm correct polarities (
Charge for about 7 hours.
R Confirm "Charging" is displayed (
R When the batteries are fully charged, "Fully charged" is displayed.
Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
charge again.
Registering a handset to a base unit
1
Base unit:
Press and hold MLOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
2
Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and
For assistance, visit www.panasonic.ca/english/support
TGFA30C(en)_China_1212_ver011.pd3
,
then repeat this step.
is displayed.
3
,
).
2
).
1
) and the charge contacts with a dry cloth and
Installation
1
).
2
3
2014/12/12
14:02:32
Publicité
Table des Matières
