Babyauto Munoa DS01 Mode D'emploi page 26

2. SEAT PARTS AND FITTINGS
A. Cover.
B. User manual´s poquet.
C. Ergo seat cushion for group 0
D. Harness pads.
E. Harness straps.
F. Buckle release-button.
G. Locking buckle.
H. Harness adjustment button.
I. Harness adjuster strap.
J. Child seat gradient adjuster.
K. Metal lever for angle adjustment Group 0.z
L. Button for fastening seat cover.
M. Group 0 belt hook.
N. Locking clip.
O. Group 0 and 1 belt hook.
P. Harness strap slot.
Q. Harness pad connector.
R. Group 1 belt hook.
S. Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 0.
WARNIG
Do not use the child seat on a passenger seat fitted
with an active airbag.
1. Recline the seat as posible. To adjust the reclining
position of the child seat, pull the red handle
forward until you reach the required position (3.1).
2. Pull the metal lever
pull upwards releasing the lever when the stop is
reached (3.2).
3. Install the child seat rearward facing (3.3).
4. Fasten the child seat by thread the lap bel and the
diagonal belt throught the belt guide slot.Thread the
diagonal belt throught the
the back, and thread the lap belt throught the slot
with blue arrow on the base (3.4, 3.5, 3.6 y 3.7).
26 Child restraint system
Only suitable for Group 0, approx.
0 to 9 months (0-10 Kg.)
K at the front of the base and
O slot with blue arrow on
J
M
MUNOA